CUBOID Pro by Joyetech – throw out your iPhone. Or is it too early?

No one can blame Joyetech for low activity. That’s just the main focus of these guys is on newcomers and the middle class of users, and they often forgot about the flagship segment. For a long time, the only device for more or less experienced users was Cuboid , the complaints for which were almost more than positive reviews. If I’m not mistaken, the next update was Cuboid 200 , which did not receive due attention due to controversial points in the construction and form factor. Just yesterday, I learned that the line was continued by the new CUBOID Pro box .
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?
Looking ahead to say that Joyetechdoing things that are beyond understanding again. Instead of making a 200W working box that can compete with market leaders, the guys are doing another half-concept box, whose target audience will be vaping enthusiasts, rather than wide categories of customers. Approximately the same situation was with Ocular C and Cuboid TAP , presented relatively recently. But despite this, you will have to admit that boxing will be quite interesting.
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?
The main part of the novelty is a 2.4-inch TFT touchscreen display (320 * 240 dpi). It is thanks to the display that the entire board is controlled. In addition to the main ones, the board also has functions for displaying clocks and custom wallpapers for the menu. The vibration of the motor that reacts to the touch of the touch panel of a box mod should enhance the sensation of use. I almost forgot! There are two fire buttons – physical and sensory. I don’t want to talk about these moments for a long time, the producer showed everything in his video. I want to note only that Joyetech collected the experience of other manufacturers (for example, SMOK) and made the most technically acceptable box.
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?
After reviewing the performance characteristics presented below, you will understand that in terms of characteristics that are important for vaping, nothing has changed much. Another question is thatJoyetech introduced a new colorful firmware and, together with a large display, all this gives an excellent result. In addition, you should pay attention to the presence of the function of displaying time or wallpaper – a trifle, but nice. Also interesting for me was the function of “fitness tracker”, which allows the user to keep track of the steps taken.
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?
– adjustable power range from 1 to 200W;
– maximum output current – up to 50A;
– supported resistance of the atomizer – from 0.1 to 3.5 ohm;
– supported resistance of the atomizer in the temperature control mode – from 0.05 to 1.5 ohm;
– temperature limit from 200 to 600 degrees Fahrenheit (100 – 315.5 Celsius);
– possible modes of operation – VW / VT (Ni, Ti, SS316) / TCR (M1, M2, M3);
– 2.4 ”TFT display;
– The ability to update the firmware.
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?
With the power source here did not begin to invent anything interesting – a compartment two batteries 18650 under a cover on a latch. Charging box mod due to the micro usb connector current in 2A. Do not forget about this feature of the connector, as the firmware update. This item is especially relevant for such clever boxing mods. Suddenly the manufacturer will want to add something else.
CUBOID Pro by Joyetech - throw out your iPhone.  Or is it too early?

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available : Joyetech Cuboid PRO with ProCore Aries Kit

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA 

JOYETECH CUBOID TAP 228W TC STARTER KIT REVIEW

The Full Indepth Review of the Joyetech Cuboid Tap Kit

This starter kit introduces JoyeTech’s new groundbreaking Cuboid Series with their proprietary TAPTEC Technology and a pressure-sensitive control system, married to the JoyeTech ProCore Aries Sub-Ohm tank with its 4ml juice capacity. The kit contains the Cuboid TAP mod, ProCore Aries atomizer, a ProC1 (0.4ohm) head, a ProC1-S (0.25ohm) head, a spare glass tube, mini-USB cable, and spares. Let’s have a look at how it measures up to other kits in this class.

 

THE CUBOID TAP 228W MOD

The Cuboid TAP 228W ‘s appearance stopped me in my tracks for a second, mostly due to the outrageously retro look of their silver and wood-finish model. It instantly reminded me of the heydays of the iconic Zippo lighter, which conveyed a kind of dark glamor and sheer bad-boys – and has, incidentally, become highly collectible.

The mod of the Cuboid Tap

Deceptively plain looks

The new Cuboid TAP228W is 28mm thick, 41mm wide and 134mm high. It’s not a small mod but not that much bigger than the Cuboid mini that they released prior, but the design is all flat planes and straight lines for a good grip to ensure the user can apply the new pressure control technology. They have certainly improved the mod compared to the Cuboid 200. It comes in 5 colors with vivid decorative art designs on the red, yellow and blue mods and you can match your ProCore Aeries tank colors to the color of the mod. There’s also a plain black mod, but I absolutely had to have the silver and wood-finish model!

It appears very sturdy and looks heavier than its 350g (mod and tank combined). There’s a large 1.3 inch (3.3cm) OLED screen with a crisp display including an analog clock and information about mode, voltage, temperature, amps, resistance, and battery level. The large firing button is on the side, but the adjustment buttons seem to be missing… which brings us to the main feature:

 

TAPTEC(TM) Tech

The screen and LCD of the Cuboid TapJoyeTech is one of the first mod manufacturers to use a touch-pad system in place of the standard adjustment button system. This was first introduced on their Ocular C Mod, but they went even further and added haptic feedback, which means that the mod acknowledges your interaction with a vibrating motion just like your smartphone.

There are two touch-pad areas. The top area houses the tap-activated firing button (in addition to the ‘traditional’ firing button), and the bottom touch-pad area takes the place of traditional adjustment buttons. In terms of design progression, the addition of the touch-pad system may be more important than it seems.

Smartphones and electronic gadgets are overwhelmingly built on tap-screen interaction, and JoyeTech took an important decision to build the Cuboid TAP on this type of interface. While tap-screens seem like a logical design progression, traditional adjustment buttons are very entrenched in the vaping industry. I loved the novelty, but some users may prefer ‘real’ buttons, and we’ll soon see if this design will become a new trend and start appearing on more of the best vape mods.

Focus On www.urvapin.com For More Vape Start Kit.

Pressure-Sensitive Capability

At first, I regarded this feature as just a ‘cool gadget addition, ’ but I realized it is handy when I found myself in a poorly lit room. Keep in mind that there is just one protrusion (a manual firing button) to help you orientate the device correctly. I was happy to find that I didn’t have to fumble around with the almost featureless mod to activate it in the dark. Just squeeze it to lock, unlock or take you to the menu function. The vibrating motion provides feedback that adjustments have been made.

 

Battery Bank

The battery compartment of the Cuboid Tap
Two 18650 batteries powers the Cuboid TAP for a peak of 228W. There’s a hinge with a lock on the bottom for swapping batteries, but JoyeTech has made excellent provision for fast onboard charging with a USB cable at 2A as well as a convenient bypass mode. An advanced trickle charge system keeps the charging levels in the batteries at the same level (balanced charging).

18650 batteries deliver a lot of power, and it makes sense to use the resource as a power bank for emergency recharging of your other gadgets. You’ll need to get an optional external Reverse Charge adapter (RC adapter) which fits into the gold-plated 510 connectors, and provides power via USB output. The spring-loaded 510 connector accepts a range of tanks between 4.0mm to 5.5mm deep and up to 25mm diameter.

Tank and mod of the Cuboid Tap

Safety

You can lock the traditional firing button and the touch-pad screen, plus there is a 10-second safety cut-out to prevent auto-firing. Reverse polarity protection prevents damage to the mod in case you insert batteries the wrong way around; there is dual-circuit protection against overcharging and over-discharging, and the firmware is upgradeable.

 

Mod Performance

JoyeTech used a powerful chipset for the Cuboid TAP to manage a power range between 1 to 228W and up to 50A max output current. The three TCR (Temperature Control Range) modes support titanium, nickel, and stainless steel and a temperature range between 100 – 315C (200-600F). The Cuboid TAP’s chipset will handle atomizer coil resistances from as low as 0.05 Ohm to 1.5 Ohm in TC mode and 0.1 Ohm to 5 Ohm in wattage mode. There’s a preheat function, so the firing button responds instantly. With such versatility, you know it will handle the type of tank and vaping style you prefer.

 

The Aries Procore Tank on the Cuboid TapTHE ARIES PROCORE TANK

In our previous review of the ProCore Aries sub-ohm tank which was featured on the eVic Primo Mini, we described it as one of JoyeTech’s best sub-ohm tanks, and it works well with the Cuboid TAP too.

  • The 4ml e-juice tank (2ml for EU customers) is easy to refill without any mess due to the flip-top fill system
  • 11mm wide-bore Delrin Drip Tip stays cool during vaping
  • The dual airflow system is very open to deliver very dense vapor, but JoyeTech has added well-designed airflow control to make the tank appealing to MTL users
  • The airy draft produces excellent flavor, also due to the JoyeTech ProC1 series coil system. The tank kit includes two atomizer heads (ProC1 0.4ohm atomizer head (40-80W range) for DL fans and a ProC1-S 0.25ohm (25-35W range) atomizer head for MTL fans).

 

OVERALL

Joyetech are well known for delivering some of the best e-cigarette devices in the world and the Cuboid TAP is another fine example. It’s powerful, it manages a huge range of temperatures and conditions, and the safety features are extensive. It works well with the Aries ProCore tank. The tap-style interaction and haptic feedback make it a peculiar sort of ‘familiar’ – quite different from ‘traditional’ vaping gear. The JoyeTech Cuboid TAP is a brilliant buy for early adopters of new tech – it’s the coolest thing on the block right now!

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available : Joyetech CUBOID TAP 228W Starter kit

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA 

JOYETECH CUBOID LITE REVIEW – LITE UP MY LIFE

The Cuboid Lite is basically a shrunk down version of the already awesome Joyetech Cuboid Pro, but having many of the same features that made its bigger brother such a great device. Now packaged with the all-new Exceed D22 sub-ohm tank that promises to cater to vapers of all origins regardless whether you prefer vaping direct lung or mouth to lung.

Product Pros

  • Customizable
  • Gorgeous Display
  • Versatile Tank

Product Cons

  • Tank Capacity

Joyetech Cuboid Lite Review: Breakdown

Cuboid Lite

Build Quality

Straight out of the box the Cuboid Lite shares a lot in common with the Pro aesthetics-wise. Featuring the same glossy and colorful finish on the sides which are constructed from a high-quality zinc alloy. One thing that is important to pay attention to is that although the Cuboid Lite looks exactly like a mini version of the Cuboid Pro, it does not have the same capacitive touchscreen, instead opting for the typical up and down buttons to cycle between settings. Although fans of high-quality touchscreens might be disappointed with this decision, I can’t help but feel that it makes sense since the Cuboid Lite is a smaller device and it’s easy to see why Joyetech wanted to avoid any issues regarding using such a tiny device with touch functions.

Measuring out to a tiny 26mm* 41mm * 114mm, its definitely a mod that won’t give you any problems when carrying it around or keeping it in your pocket. It’s relatively lightweight too, at a mere 186 grams, anyone keeping it in their purse or shoulder bag shouldn’t be too bothered by the extra weight. The front of the device sports a 1.45 inch TFT color screen that displays colors and details brightly and crisply with very little pixelation seen by the naked eye. Also on the front is a cyclops up and down switch used to navigate the menu or adjust the temperature and wattage settings on the device. While these feel responsive enough, I wish Joyetech would’ve opted for a split button type design to give these buttons an overall better tactile response. The firing bar which spans almost the entire height of the Cuboid Lite is located off to the side.

Pressing on it is easy and comfortable with a reasonable amount of travel that ensures that depressing the button isn’t too stressful on the hand while also making accidental firing of the device unlikely. The top sports the new and improved spring loaded 510 connection which serves as a massive upgrade over the 510s used by Joyetechs older models. Testing a bunch of atomizers including the Exceed on it gave me no connectivity issues and all the tanks sat flush with the top of the mod. The Cuboid Lite can amazingly fit atomizers up to 25mm in diameter which is pretty impressive for a device of this size, so if you have other tanks or RDAs lying around the Cuboid Lite is almost guaranteed to be a comfortable fit for those atomizers.

Focus On www.ave40.com For More Vape Kits.

Vapor Quality

The kit comes bundled with a 0.5ohm direct lung coil head and one 1.2ohm mouth to lung coil head. Both managed to produce more than adequate amounts of vapor (of course expectations have to be managed when using the MTL coil) while flavor production was exactly on point. No complaints with coil durability here either as each of the coil heads easily lasted up to a maximum of 7 days before I experienced any noticeable drop in flavor and vapor quality.

The Exceed D22 tank holds up to 3.5ml of eliquid which to be quite frank isn’t that much considering the Cuboid Lite easily hits the 80-watt mark pretty easily, so if you vape anywhere between 50-80 watts you can expect to be making frequent refills. For mouth to lung vapers though, 3.5ml is easily more than enough and you shouldn’t be surprised if a single tank lasts you the entire day.

The Cuboid Lite works well with lots of atomizers in the market as well making it ideal for vapers who enjoy experimenting with tanks and RDAs of various sizes. Connections sit flush and I’ve yet to experience errors such as atomizer shorts or random misfiring by this device.

Cuboid Lite 2

Versatility

Despite its size, the Cuboid Lite packs quite the punch with its complete feature set. Sporting the standard set of temperature control options such stainless steel, nickel, and titanium, along with options for customisable TCR values, pre-heat, and an all-new power limit mode that lets you set a specific wattage range for a set number of resistance values.

What this basically means is that the feature protects your high resistance coils from getting potentially burned out when accidentally setting it to higher wattages than what it’s normally rated for.

Portability

While the Cuboid Lite doesn’t support a removable battery, it does have a quick charging feature that lets the 3000mAh internal LiPo battery get up and charging in almost no time at all. Simply plug in a micro USB cable to the device and hook it up to an outlet, or power bank.

The design is plenty ergonomic and the firing bar lets you use the device comfortably regardless of your preferred grip making extended vaping sessions a thing for just about anyone who decides to pick up this kit.

Cuboid Lite in hand

Conclusion

While not as fantastic as its bigger brother in terms of overall features, the Cuboid Lite still manages to do a pretty decent job of giving out a decent amount of power with good battery life. The Exceed D22 tank gives you a lot of potential options for vaping the way you want to and last but not least, the Lite simply looks great. Definitely, not a bad pick for beginning vapers and even a handful of advanced users will definitely see value in this kit. If you’re looking for a device that’s packing just a bit more in features and are willing to sacrifice a little portability, check out our review on the Cuboid Pro kit.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available : Joyetech Cuboid Lite 80W Box Mod with Exceed D22 Atomizer

Hot Sale Recommendation:

Dragon Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

Dovpo Topside Dual Squonk Box Mod

OUMIER WASP Nano RTA