HellVape REBIRTH RDA Review

Today I want to share my thoughts on the recently released rape from rabbit-knights. Frankly, the stock of trust in them among users is pretty decent, and the fact that they sculpted her in collaboration with the famous western reviewer Mike Vapes only attaches importance to this project. Therefore, in advance, of course, it was interesting.

Feel for ??? - HellVape REBIRTH RDA ...
Case material: stainless steel Atomizer
type: RDA Bath
capacity / depth: 2.5ml / 6mm
Diameter: 24mm
Dimensions: 32.5mm with Drip type / 25mm without Drip type
Connector: 510, pin gold-plated
Weight: 40.5g
Color: see photo lower
Feel for ??? - HellVape REBIRTH RDA ...
grade
– REBIRTH RDA
– coil trimming tool
– Allen key
– screwdriver
– additional 810th drip type
– adapter for 510th drip types
– sticker
– spare oring
– spare screws
– skvonk pin
– user manual
Feel for ??? - HellVape REBIRTH RDA ...
Looks like our hero classically, not a hint to you on the decor or retreat from the canons of dripkovnia. The strict exterior dilutes a little unless a relief engraving with a logo. And then in the vast majority of performances, it is barely noticeable. However, on the drip type, developers frankly cleared up, since there is a spare, less noticeable one. Dimensions, by the way, are not great, but this thing looks elongated.
Feel for ??? - HellVape REBIRTH RDA ...
Drip types included two, both are 810th. One is made of resin in the style “honeycomb”, the second of translucent plastic. Both of them are quite adequate in work, but for myself I chose the second option, because it is less catchy, plus there is a special groove or recess for removing condensate inside. In short, I liked the smoky straight.
Feel for ??? - HellVape REBIRTH RDA ...
The adapter was put into the box for the 510th colleagues, although it was not provided for blowing only one spiral here.
Feel for ??? - HellVape REBIRTH RDA ...
The dome has a spherical treatment. It sits firmly on the base thanks to the keys, but left a significant move to adjust the side airflow, which is achieved by turning the body relative to the base. The move is tight, but there is no need for risks.
Feel for ??? - HellVape REBIRTH RDA ...
On the side of the dome there are two symmetrically arranged air grids, each with 16 holes with a diameter of 1.2 mm each. Such a construct provides a fairly loose tightening, but not the freest that I have ever tried. Noise is mean while whistling is not.
Feel for ??? - HellVape REBIRTH RDA ...
The deck is quite simple in construction and therefore quite comfortable, but it has its own nuances.
Feel for ??? - HellVape REBIRTH RDA ...

Focus On www.ave40.com For More Vape Tank.

We see two racks with decent holes for fastening the two spirals with massive screws for the slot, similar spares. The fixation of the latter is simultaneous, I do not particularly like that, plus the distance between the centers of the holes for the legs is already 12mm. Therefore, we can safely say that this thing is designed for wide builds, and in general it is sharpened for experiments of coil-builders. This is confirmed by numerous photos in social networks.
Feel for ??? - HellVape REBIRTH RDA ...
Spirals are blown through special nozzles that are peeled at an angle from the deck. The output dimensions of the latter are approximately 7 x 3mm, which is quite a lot. Again, refer to the fatty windings.
Feel for ??? - HellVape REBIRTH RDA ...
Installation of spirals is a simple matter, only you have to leave your legs at a decent length. Carefully put in a box, Coyle trimming tool insists on a length of 6.5mm, but I achieved a comfortable fit for me spirals only on a length of 8mm.
Feel for ??? - HellVape REBIRTH RDA ...
Laying wool matter and not worth the attention, however, there is one nuance here. After laying, pay attention – if it does not block the airflow from the inside, that’s how I did it. I had to dodge and remove it sideways, using tweezers from inside the deck.
Feel for ??? - HellVape REBIRTH RDA ...
The taste of this thing is quite decent. This is a clear taste of the side blowing, in which the liquid is normally decomposed into components without excessive sweetness and satiety of the bottom blowing. Probably, I can compare our hero with Bonza 1.5 RDA, recently visited my tentacles. The taste is very similar, but it seems that here it loses a little (very little) in brightness, although I can be mistaken about this.
Feel for ??? - HellVape REBIRTH RDA ...
The capacity of the bath is not the largest, but it can be filled above the edges – the height of the air supply channels allows. Yes, and bury the top without any problems. A complete ringing pin will help solve the problem of autonomy, if any. The outlet is located at a small take-off, therefore some liquid NC is provided for you.
Feel for ??? - HellVape REBIRTH RDA ...
Both pins are gilded and perform well.
Feel for ??? - HellVape REBIRTH RDA ...
Impressions of use
It is a decent drip, designed more for fat builds, which means it is quite suitable for use on mechanical mods. Made on a solid top five, and it looks classically good. Well, as for the cherries for her, I will consider a decent taste transfer and a humane price tag.
Feel for ??? - HellVape REBIRTH RDA ...
I will recommend to those who like to experiment with windings – coil-builders, as well as fans of the side blowing.

Feel for ??? - HellVape REBIRTH RDA ...

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available : Hellvape ReBirth BF RDA

Hot Sale Recommendation:

Smok Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

OUMIER WASP Nano RTA 

Voopoo X217 Box Mod

Runic variety: Rune RDA from Voopoo

The company Voopoo has released a device Rune RDA. Dripka received a baseless base for two spirals, a diameter of 24.6 mm and compatibility with skonkers.

Voopoo introduced  a new Rune RDA instagram on Instagram . The device was made in ten color variations. The 810th epoxy resin driptip was placed on top, and an adapter was provided for the 510th version. A runic ornament was carved on the topkep. In the skirt, perforated on both sides by a pair of square holes. For the best quality blowing they made at a slight angle. Adjustment provided rotation relative to the base.

The base was realized without racks, with a volume reservoir for liquid, along the edges there were grooves for vertical installation of the spirals and a hole for the bottom airflow between them. Fixation provided with screws. In addition to the usual ones, the device was equipped with a BF pin to work with SQUONK modes.

The Rune RDA package includes two screwdrivers, a set of screws, oringov, a adapter for a driptype, a BF pin and an instruction.

Main characteristics:

  • Height – 26 mm
  • Diameter – 24.6 mm
  • Adjustable bottom airflow
  • Decoupled base
  • Compatibility with skonkerov

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available : Voopoo Rune RDA

Hot Sale Recommendation:

Smok Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

OUMIER WASP Nano RTA 

Voopoo X217 Box Mod