Rincoe Mechman 228W Kit Review

vruke

The design of the battery pack sends us a little to the popular Drag 157W and Drag 2 , which is a plus among most blown plastic devices. Consider the whale in more detail.

Equipment

Michman box mod, clearomizer with 0.25 ohm evaporator installed, additional 0.2 ohm vaporizer, additional bubble glass, a set of origins, charging cable, instructions.

vnabore

Mod sizes

Height: 90 mm, 
Width: 54 mm, 
Thickness: 29 mm

gabarit

Tank dimensions

Height: 36 mm, 
Diameter: 25 mm on landing (28 mm near the glass), 
Volume: 4.5 ml

Specifications

Power range: 1 – 228 watts (200 F – 600 F or 100 C – 300 C for working with thermal monitoring), 
Supported resistance: 0.08 – 5.0 Ohms, 
Thermal monitoring support for stainless steel, titanium, nickel, 
Maximum charge current: 2 A.

View more vape devices: https://www.ave40.com/

Box mod review

The mod is made of zinc alloy and is available in two colors: steel and black. A separate feature of the Michman vape is removable panels with colorful prints, which can be purchased separately or even created with your own design.

vidnapanell

types of interchangeable panels with different prints

The panels themselves are made of leatherette and zinc alloy. To change, you will need to unscrew the 4 screws under the asterisk. Another panel made of steel hides a compartment for 18650 batteries.

vidnanodd

Located on top of the 510 connector. The site is designed for planting atomizers up to 25-26 mm.

vidverha

On the front side there is a Fire button, made in the form of a trigger, a screen, plus and minus buttons, a USB connector for charging and updating the firmware. The Fire button has a nice relatively tight move and a nice click.

osmotrmoda

Below are the gas outlet openings. In order to change the batteries, you need to pick up the lid from the bottom using a special recess. The lid rests on a pair of neodymium magnets, and does not particularly play, although there are specimens with such a problem.

modbox

On the inside there is also a rubber spacer to protect against batteries with damaged insulation.

The batteries inside are pretty tight and don’t hang out if the mod is shaken badly. There is a ribbon for easy extraction. When handled carefully, the battery braid will not break.

Board functionality

Turning the device on and off by pressing the Fire button five times. On a monochrome screen, which will consume less energy compared to a color display, we see the information and the charge of each battery, the selected mode of operation, power, puff timer, atomizer resistance and supply voltage.

vidnabox

Up to 100 watts, adjustment takes place at 0.1 watts, and after 100 – one at a time. 
To change the operating mode, you must press the Fire button three times and switch using the plus and minus buttons. 
Varivatt, bypass, nickel, titanium, stainless steel and TCR temperature control modes are available to us. To adjust the power in thermal control mode, you must hold down the Fire and minus buttons until the power value blinks. 
By pressing and holding all three buttons, you can lock the resistance value. 
If you hold down the plus and minus buttons, you can block them, while the Fire button will continue to work.

boxmodda

View more vape devices: https://www.ave40.com/

Review Mechman Mesh Tank

Above is a rubber 810 drip tip in two origins. Therefore, to replace it will have to look for just such. Above is the familiar refueling system in the form of a cover that slides to the side, which sits quite tightly.

vidbaka

The filling hole is quite wide, so there are no problems with many bottles. There is also a silicone spacer around the hole to protect against depressurization.

vidnazapravku

 

When disassembling the atomizer, the glass is held between the base and the lid with the air using a replaceable evaporator. If anything happens to the glass, there is a spare in the kit. Initially, an evaporator is installed in the tank on the network, with a resistance of 0.25 Ohms for 40-60 watts.

The blow hole is quite wide. The 0.2 Ohm evaporator, which is additionally included, is equipped with two grid spirals for operation from 50 to 80 watts.

isparr

The airflow holes are slightly smaller, but are generally comparable with the first option. At the base is a ring for adjusting the airflow and two air intake openings. The pin is gilded, it sticks out not well enough, therefore the atomizer is not recommended for use on mechanical mods with a hybrid connector.

When using an evaporator on a grid with a power of 65 watts on a fully open airflow, a good amount of steam is obtained.

The puff is quite pleasant and the taste is also good for this type of evaporator.

On an evaporator with one network at 65 watts, it feels that there is a lot of air for such a winding, but the taste is quite acceptable.

If you block the blowing by half and reduce the power to 50 watts, the situation becomes a little better. But because of the giant vent hole in the evaporator, there’s still a lot of air for my taste.

modvladoni

Usage Reviews

Mechman 228W mod as a whole turned out to be quite convenient to use. The weight feels good in the hand, the Fire button is comfortable and pleasant to use. Functionality can be called familiar and familiar. A complete atomizer does not stand out especially, while it is quite suitable for use for the first time. Perhaps someone will be unhappy with the lack of information on the number of puffs or adjusting the preheating of the spirals. But for me personally, the functional board was enough for unpretentious use for every day.

Cons and pros

Minuses

– On some copies there is a backlash of the battery cover,

– Condensation leaks slightly under the cover,

– Under the bright sun, the screen is almost invisible, the backlight is rather dim,

– Due to the design of the lower part, the mod sways slightly with vertical setting,

pros

– The possibility of customization thanks to a removable door,

– Easy-to-use board with familiar board modes,

– An interesting design that stands out from the crowd

View the product here: https://www.ave40.com/rincoe-mechman-tc-kit-228w-with-mechman-mesh-tank-4-5ml.html

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

SMOK Mag 225W Kit Review: The Pistol Grip Box Mod

I got to give it up to SMOK for designing their new SMOK Mag 225W box mod in the mould of the most obvious thing you should model your box mod on – a pistol-grip. It makes sense, doesn’t it? What other piece of modern machinery also needs to keep in mind the way it is held by its user, and needs to make sure that it is comfortable and portable to be carried around?

The answer to that question becomes clear once you lay your eyes on the Mag 225W. Not only is the source of SMOKTech’s inspiration evident from the product title of the Mag 225W, but again, there’s no mistaking what the designers at SMOKTech wanted to recreate with the Mag 225W.

SMOK MAG 225W Review

The form of the Mag most definitely resembles the grip of a modern pistol, with the Mag’s firing button right where the trigger would be on a real gun. And taking the gun-design even further, SMOK included a unique flower-shaped mechanism right next to the trigger button that unlocks the bottom-loading battery door.

You press the button and the battery doors pop open, revealing the box where you load your two 18650 batteries into and then pop back into your SMOK mod. Similar to what? Yes, like loading the cartridge of a real gun.

The entire mod, however, is covered by a high-definition OLED screen, which I must say, SMOK has become the master of recently. Their screens and the information displayed on them are always bright and crisp.

Another area in which SMOK has proven itself of late has been in the awesomeness of their tanks and coils, and by “awesomeness” I don’t only mean how well they work, but just their real size and cloud-making potential.

The Mag, being a high-powered box mod, of course, comes with the TFV12 Prince sub-ohm tank, and two coil options that appeal to both the cloud-chaser in all of use, but also flavor fiends.

Box of the Mag

Here’s what you’ll find inside your SMOK Mag 225W kit:

  • One Mag mod
  • One TFV12 Prince tank
  • One V12-Q4 0.4ohm quadruple coil
  • One V12-T10 0.12ohm decuple coil
  • One spare glass tube
  • One USB charging/upgrade cable
  • One instruction booklet
  • One screwdriver
  • One bag of spare parts
Made Ready To Shoot That Vapor

So, yeah, the SMOK Mag 225W looks like a gun. That is the first thing that hits you over the head, like the butt of a gun, about the SMOK Mag 225W. That and the fact that the SMOK Mag 225W is rather heavy.

It comes in at a brawny 265g, and that’s without adding the batteries or the tank. Plus the fact that the entire outer casing of the Mag is a zinc alloy, it was most assuredly going to be packing on the pounds. But the extra weight and heft of the Mag are not to its detriment.

For a machine this powerful and designed to look like a killing implement you would expect it to be a little heavier than most. The other notable feature of the Mag is the OLED screen that takes up most of the rest of the mod. SMOK usually hits it out of the park when it comes to the OLED displays that rival most HDTV’s in their clarity and brightness and that is the case with the Mag.

The 510 connection at the top of the device is spring-loaded and although its diameter measures 28mm, it can easily and comfortably accommodate a tank even 30mm in diameter. The trigger on the Mag 225W fires beautifully, and it is only one of the many gun-like features on the Mag that make it a dream to handle.

The designers at SMOKTech have displayed an astonishing amount of vigor in fine-tuning the smallest details on the Mag’s outer design. There are curves and textured grips galore. Each side of the mod features a thumb-groove so even southpaw vapers can feel at ease when holding the mod.

At the top right of the OLED screen, you’ll see the other feature of the Mag that mimics a gun – the release button for the battery box. When you press down (hard, it doesn’t release easily) on the button, the bottom-loading battery door pops open and spits out the battery clip, which then lets you install two 18650 batteries.

Embedded within the OLED screen are two up/down selector buttons, and beneath those buttons you’ll also find your USB charging port. Battery vent holes can be found along the spine of the device, as well as running underneath the 510 connection.

Now, I already reviewed the TFV12 Cloud Beast King sub-ohm tank, and the Prince version doesn’t seem to be much removed from its royal father. It does have a more substantial e-juice capacity at an enormous 8ml, which can be added to the tank if you install the separate convex glass tube that raises the capacity from 5ml to 8ml. There’s also a convenient release button on the outer part of the top cap that ensures an easier time of filling the tank.

How To Fire It Up

The SMOK Mag 225W sports a new chipset in its insides only I don’t know exactly what this new chipset adds to the SMOK Mag’s bag of tricks. All the vaping and output modes are the same ones available on most other SMOK mods like temperature and wattage control, and memory mode.

So regarding vaping styles, there’s not much innovation in the SMOK Mag 225W. Apart from that, though, the SMOK does feature a very straightforward interface. The reduced amount of vaping modes inversely makes the Mag that much easier to use.

You press the firing button five times to turn the device on, and then you’ll see the main menu display on the OLED screen. The main menu reads out all your essential vaping information like wattage, coil resistance, voltage, vaping timer, and voltage.

Three additional clicks of the firing button let you access a new menu from the three vaping modes: temperature mode, wattage mode, and memory mode. And one thing I did notice about using the SMOK Mag 225W was how responsive all the buttons were. There was no waiting or holding of buttons to access a specific adjustable feature.

Bang Bang I Vaped You Down

The TFV12 Prince sub-ohm tank came installed with a V12-Q4, which was a coil option that was available with the TFV12 Cloud Beast King and it was the best coil to pair with that tank, in my opinion. I didn’t expect the performance to be that much different with the Prince version of this sub-ohm tank and it wasn’t.

I slapped on the bubble tank to the Prince to get an extra e-juice boost, and I filled it up with some Banana Cream Pie from the Vape Dudes. I left the mod in its default wattage mod, and kept the Q4 close to the top of its recommended wattage range of between 40-80W, at 70W. The flavor was awesome, and the vapor relatively warm and pleasing to taste.

Switching out the coil for the ten-coiled vaping monster, the V12-T10 coil did bring me higher up the cloud-making ladder. But since the maximum wattage output on the T10 is only 110W, it wasn’t possible to go all the way to 225W.

But, after vaping with the two stock coil options, there was no need to get to that level of power output. Both coils worked amazingly, and I got more than enough satisfaction for my taste buds as well as witnessing the birth of several cloud monsters.

The SMOK Mag 225W vs. Others: That Was Close

When it came time to make a comparison, I thought about one high-wattage device that I reviewed recently that I really liked, the Aspire Speeder. It doesn’t get all the way to 225W, but I only vaped on the SMOK Mag at close to 110W, so I wasn’t looking to make a power comparison.

The Speeder, despite its catchy title, is somewhat dour and lifeless regarding its design. It’s all-black, and colorless like it was going to a funeral. But, underneath all that seriousness, there was a serious, cloud-making device.

The A3 and A5 coils that came in the Speeder kit were some of the best coils I’ve ever had the pleasure of vaping on; they delivered amazing cloud quality, in both flavor and size. But for cloud size and cloud taste, it is hard to beat the V12-Q4.

It’s four coils, and spacious airflow slots made it a great flavor and cloud producer. And paired with the Mag’s high-wattage capabilities, the two together made sweet vaping music. This compare is a tough one, so I’m going to have to get superficial.

I liked the Aspire Speeder’s performance, but its look and design did not make me think of “speed” or a fast-moving device of any sort; I thought more of donkey’s behind. The Mag, while obviously modeled on a gun grip, is not just a “mod that looks like a gun.”

The model was the right one to follow, and the ergonomic design is beautifully done, well-detailed, and makes the Mag a perfect mod in terms of durability and functionality. The Mag wins this one just on the merits of its attractive but also utilitarian design.

What’s So Special About It

View more vape devices: https://www.ave40.com/

Design/Looks

It would be easy to be put-off by the Mag’s look and design. I know I was, initially. But when I held the device in my hand, all my doubts just vanished. It made perfect sense. The grip felt great, and the zinc alloy construction gave it a reassuring heft.

Build

The Mag’s build is more functional than attractive. I wouldn’t call it the greatest-looking device, but in terms of quality and knowing that the mod will last and perform well, then the Mag has that and more.

Easy to use

The Mag has a simple interface, and the lack of different vaping modes means there’s no confusion over finding the best modes for you and adjusting it to your specific tastes.

Any Cons?

Gun design

I’m not a huge fan of guns (as you could probably tell). What that has to do with the SMOK Mag 225W mod kit? I know it made sense to model a mod around a gun grip, since, what else has such excellent hold?

So, this con isn’t a “con” in the sense that it was something about the device’s performance or functionality. It’s incredibly subjective on my part, but it hit me hard enough that I felt I had to mention it.

Yes Or No

The SMOK Mag 225W kit is a step-up for SMOK, who’s had some notable misfires in the past. Their recent devices, however, seem to have righted their path and shone some much needed positive light on the SMOKTech brand.

I was impressed by the pistol-grip design that I thought would just be ridiculous. But the feeling was believing, and just from the first few moments of holding the mod convinced me that this was the way to go. It was a natural choice.

The OLED screen was another highlight and yet another thing that SMOKTech is always getting right. The Prince tank and the V12-Q4 coil made thick, beautiful clouds and the taste of my Banana Cream Pie was on point.

I give the SMOK Mag 225W kit an 8/10.

View the product here: https://www.ave40.com/smok-mag-p3-vape-starter-kit-230w.html

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

OWL Tank by Advken review, swatchable capacity and flavorful

Advken Owl Tank

8Color Options, Feel The Advanced Beauty Of Military Color Matching

As one of the most popular sub-ohm tank of Advken, owl tank is back, 8 color options for vapors. Top airflow control, give you purest flavor, and zero leaking!

Advken Owl Tank 8 Colors

Parameter

Advken Owl Tank Parameter
Top Airflow control, no leaking and avoiding condensation, adjustable airflow control, you decide the smoke just by turning AFC rings.Advken Owl Tank Top Airflow control
Advken Owl Tank Airflow control

Special Design

ADVKEN loves nature and the colorful world. This is why we create animal series, now we have owl tank and owl kit. We want to bring the freshest and natural products with unique characteristics to vapors. Owl Tank is like a bird, top airflow makes airflow adjustment easily, When you vaping, you are flying in the sky, with owl tank. Top airflow control also avoids leak and condensation. We prepare different color 810 drip tips for the different color tanks, Daddy and mommy, they have 6 children, an owl family.

Advken Owl Tank Special Design

Top Sliding Refill System

Adopts the newly design slid to open top fill mechanism-A simple slide of the top cap then you can fill the tank with ease, which makes refilling easier and quicker.

Advken Owl Tank Refill

More Choice, Easier Vape

0.2Ω and 0.16Ω Mesh Coil Inside which is compatible with Manta/ TFV8/Big Baby/Baby Beast and NRG tank, the better flavor and more compatibility for other tanks, gives you the best vape time

Advken Owl Tank Coil
Advken Owl Tank Coil Focus On www.ave40.com For More Vape Tank.

How To Install The Coil Head

Advken Owl Tank install the Coil

You Deserve To Own An Owl Sub-Ohm Tank

Advken Owl Tank

Components

Advken Owl Tank Components
Advken Owl Tank Includes

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Advken OWL Mesh Tank

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p1e0e21*

Advken Dark Mesh Sub Ohm Tank – again non-service …

Today we will have a simple hero from Advken. Recently, they decently sat down on non-service – two of the three extreme devices belonged to this particular squad. To be honest, it’s rather strange to observe such a picture, because these guys can decently make serviced atomizers. And the most interesting thing is that, as a rule, non-servants are added to boxing mods, but this is not a story about Advken – they just stamp tanks. Perhaps this case will be an exception, and a little later we will nevertheless become witnesses of the update of the lineup of boxing mods – please!

Advken Dark Mesh Sub Ohm Tank
Advken Dark Mesh Sub Ohm Tank - again non-service ...
Case Material: Stainless Steel Atomizer
Type: Maintenance- Free
Evaporators: 0.15Ω
Capacity: 5 / 6ml
Diameter:28mm
Height: 54.5mm with drip type
Connector: 510, pin gilded
Weight: unknown
Color: see photo below
Advken Dark Mesh Sub Ohm Tank - again non-service ...
Options
– Dark Mesh Sub Ohm Tank
– replaceable evaporators 2pcs 0.15Ω (one pre-installed)
– spare origins
– traditional rag
– spare glass
– certificate

The exterior of our guest is pretty standard for the segment to which he belongs. This is a fairly massive instance, but in height, it is not the largest. Specific risks and of course the colorful drip type are responsible for the decor.
Advken Dark Mesh Sub Ohm Tank - again non-service ...Focus On www.ave40.com For More Vape Tank.
Release colors were only two, and those are classic. It is likely that later the developers will be generous with additional colors.
Advken Dark Mesh Sub Ohm Tank - again non-service ...
The drip type is made of resin, landing 810th. He sits in the lid, the locking mechanism of which is probably threaded. This thought prompted me to the abundance of risks on the latter. The filling holes were not shown to us, I think they will be of a decent size.
Advken Dark Mesh Sub Ohm Tank - again non-service ...
Two types of replaceable evaporators are offered, both of them on a grid. In the first case, a single performance, in the other triple.

The capacity is decent from the start, and it can vary depending on the type of evaporator used. Spare glass is also a bubble of execution.
Advken Dark Mesh Sub Ohm Tank - again non-service ...
A massive rotary ring with risks is responsible for adjusting the airflow. Naturally, to blow such serious evaporators you will need decent air intake holes, so the developers decided to make such as many as four.
Advken Dark Mesh Sub Ohm Tank - again non-service ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Advken Dark Mesh Sub Ohm Tank

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p1e0e21*

Gomax Tube Kit by Innokin| innovation made powerful and flavourful…

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Innokin Gomax Tube Kit

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p1e0e21*

Alter Pod Kit by OBS| tiny size but powerful…

Alter Pod Kit is a portable pod system kit. It comes with a 2300mAh built-in battery and 70w max output, which can meet your whole day vaping.

Constructed from durable plastic and 2.5D toughened glass, it is comfortable and hardy and comes in a variety of colors to choose from. The large LED display will show you the vaping data clearly. It comes with a sub-ohm base adapter and a salt nic base adapter.

The sub-ohm base compatible with the 0.2ohm M1 Coil and 0.15ohm M3 Coil, and the replacement pods can hold 3.5ml/2ml E-juice. The NicSalt base compatible with the 1.4ohm NX Coil and 0.15ohm SX Coil, and the replacement pods can hold 5ml/2ml E-juice. It is suitable for Nicotine Salt or high Nicotine E-liquids.Focus On www.ave40.com For More Vape Kits.

What’s more, the Nicsalt base features with dual airflow adjustable slots, you can adjust the air by rotating the base. It features the top-filling design, which effectively avoids leakage problems. With the Type C fast charging port, the built-in battery can be fully charged in a short time. Available in 5 colors: Black, Original, Yellow, Red, Blue. Just buy it now!

 

PAL Stick by Artery preview| elegant outlook and portable design…

az028%e8%af%a6%e6%83%85_01az028%e8%af%a6%e6%83%85_12

Focus On www.ave40.com For More Vape Kits.

Features:

Fresh and elegant design
Built-in 750mAh battery
Variable voltage options
Battery LED indicator
Magnet connection design
Compatible with HP cores
Easy top filling system
Adjustable bottom airflow
Multiple protections applied

az028%e8%af%a6%e6%83%85_13

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Artery PAL Stick Kit

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p1e0e14*

Joyetech EXCEED X kit Preview| powerful and quick charge…

Recently, a rather interesting trend has been observed – more and more vapers prefer small devices that fit perfectly in your pocket and have minimal weight. And we are talking not only about the POD system but also about full-fledged devices with removable atomizers. Naturally, the functionality of such devices is far from Evolv or Gene boards, but many vapers do not even need thermal control curves or pre-heating per second. Such devices can be found in the assortment of many companies, but they still appear in new versions from time to time. One example of this is the Joyetech EXCEED X kit, which is the successor of the already famous EXCEED device. The peculiarity of this whale is

Focus On www.ave40.com For More Vape Devices.

General information

The Joyetech EXCEED X kit is a compact starter kit consisting of an Exceed X atomizer running on EX series replaceable evaporators and a battery pack with a built-in battery. In the starter kit, a new atomizer is used, working on replaceable evaporators, so that the vaper can choose the best taste and puff for himself. The atomizer feature is that it is a classic tank – with a 510th drip type and airflow adjustment. The Exceed X battery pack with a built-in medium-capacity battery is designed to operate in three modes of operation and has a chipset that allows you to charge the device in half an hour. You can buy the Joyetech EXCEED X kit in five colors – silver, black, green, blue and red.

Equipment

This starter kit cannot be called something unique, therefore it is adequately equipped, but nothing special or supernatural can be expected. In a simple vaper box waiting for:

  • Battery pack EXCEED X mod;
  • Atomizer EXCEED X Atomizer with a pre-installed 1.2 Ohm vaporizer;
  • Spare evaporator 0.4 Ohm;
  • Spare glass;
  • Spare Orings;
  • USB Type-C cable for charging;
  • User’s manual.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Joyetech Exceed X Kit

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p1e0e08*

Preivew of I.O Pod Kit by Innokin| perfect for diverse kinds e-liquid…

Innokin I.O Vape Pod System Kit 310mAh

Focus On www.ave40.com For More Vape Kits.

Welcome, Innokin I.O is coming! It features at the mighty mini size and compact design, which combines elegant outlook and portable design together. Its body material constructed of Stainless Steel.

Besides, the 310mAh internal battery is charged with micro-USB and features onboard safety protections.

As for the 0.8ml refillable pod, it is compatible with Nic-salts standard e-liquid and CBD e-liquid, you’ll love the convenience and discretion of this great little kit.  In addition, it supports two coil types for your options, with 1.4Ω ceramic coil and 1.4Ω Kanthal coil respectively.

What’s more, the battery indicator reminds you of the device status clearly. Innokin I.O delivers big vape satisfaction from a tiny kit. Start your simple vaping life with Innokin I.O now!

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Innokin I.O Pod Kit

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p0e9e16*

Augvape Intake RTA preview| larger vapor of cloud

Despite the fact that many manufacturers of vape devices have paid maximum attention to such a market segment as POD systems, not all have stopped working in the field of developing traditional devices. 

Naturally, new products do not appear as often as a couple of years ago (one or two devices every week), but still, they appear, and each of the new products is definitely worthy of attention. One of the striking examples of this is Augvape, which is constantly trying to “stay on the crest of the wave.” Many vapers remember Augvape’s Intake RTA, a single-spiral flavor tank that many vapers liked right after they arrived. Based on the success of the first version, the developers of the company released Intake Dual RTA – a two-spiral version of the tank, which uses the upper air intake and side blowing of spirals.

Focus On www.ave40.com For More Vape Tank.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Augvape Intake Dual RTA

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Disposable Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

*2Y0i1p9p0e9e16*