One of the coolest squonk boxes on 1 battery is the GeekVape Aegis Squonk. Botommfider received numerous positive reviews from both Western surveyors and Russian-speaking. Let us take a closer look at the new product in 2019 and we will consider only the squonk.
View more vape devices: https://www.ave40.com/
Aegis Squonk, extra bottle, hexagon, 2.8 mm frame, charging cable, instructions.
Information for information
GeekVape Aegis Squonk is made of zinc, steel and plastic. Available in 6 colors: blue, green, red, cyan, gray, black. The mod is equipped with an AS-100 board with power up to 100 watts and support for resistances from 0.05 Ohms. The bottle holds 10 ml of liquid.
Output power: from 5 to 100 Watts,
Output voltage: from 0.1 to 8 Volts,
Supported resistance: from 0.05 to 3 Ohms,
Used battery type: 1 * 18650, Bottle capacity
: 10 ml,
Maximum charge current: 1.75 A.
Height: 87 mm,
Width: 52 mm,
Thickness: 31 mm,
Weight: 130 g.
Squonk mod review
The mod has the usual Aegis design and IP67 protection. Outwardly, it looks like Aegis Legend . The upper platform will allow you to wind atomizers by 28 mm. 30 mm will have small sides, which is not very noticeable.
The connector is steel, so it will look out from under some atomizers, which not everyone will like. On top is a sliding cover. Under it is a filling hole with silicone “lips” to protect against overflow. In such an implementation, you do not need to remove the bottle, as in other skvonki. Can be refilled from ordinary bottles. The manufacturer uses soft silicone bottles that are comfortable to press. They received a volume of 10 ml.
Below is the battery cover. For ease of unscrewing, the manufacturer puts a kind of coiligig in the kit. It is inserted into the tongue of the lid, and thus twisted.
The mod uses a single 18650 battery. The port for charging and updating the firmware is hidden underneath the plug. To replace the bottle with the complete hexagon, you can unscrew the back wall. The buttons and screen remained in their usual place.
The main modes of operation of the bot feeder
The device runs on the AS-100 chipset. We won’t focus on the board in detail; we saw it on other devices from the Aegis line.
Among the operating modes are available VW, TC, TCR, VPC, BYPASS. The screen displays information already familiar to the Aegis line. The card gives a maximum of 100 watts, and raises the resistance from 0.05 ohms.
Aegis Squonk retains the distinctive features of the design and ease of retention of previous mods from the line. The diameter of the site will allow the use of drips and tanks of 28 mm.
The connector has a sealing origin for creating a vacuum, so you need to tighten the atomizer harder and levitation will not occur. But 30 mm devices will have small sides due to bevels on the edges.
I liked the implementation of refueling. No need to pull the bottle out of the mod; refueling is done through the top. But with the wound atomizer, it is not convenient to refill with all the bottles. With a pipette or small vials of 30, everything happens fine. But with large ones like Gorrila for 120 ml or more – the atomizer interferes and it is twisted.
To wash the bottle, you can use two methods: simply rinse through the filling hole, or disassemble the mod and pull out the bottle. In the meantime, it dries, you can use the extra from the kit, which is also a big plus. The battery in the compartment sits tight. But the buttons on our copy hang out, it’s a shame. There are no complaints on the board, it has the same broad functionality as other Aegis.
And when using up to 60-70 watts, it copes well with various windings. As a result, we get an interesting and convenient swap in the usual form factor with a productive board. It is quietly suitable for everyday use. You can find this box from 42 dollars.
Cons and pros
– 30 mm drips have a slight “levitation” due to bevels on the edges of the mod,
– when the atomizer is wound, it is inconvenient to refuel from a large bottle of Gorilla,
– on some instances there are rattling buttons
– the mod is pleasantly in the hand,
– an additional bottle in the kit,
– volume of 10 ml,
– convenient gas station,
– easy to manage board.
View the product here: https://www.ave40.com/geekvape-aegis-squonk-tc-kit-100w-with-tengu-rda.html
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html