Wotofo SERPENT SMM RTA is on sale at Urvapin!

Designed by Suck My Mod and WOTOFO, the unique rebuildable tank atomizer Wotofo SERPENT SMM RTA features a unique single coil build deck which is designed to support both forward (leads wrapped over) and reverse (leads wrapped under) coil building.Now Wotofo SERPENT SMM RTA is on sale with comparative price at urvapin. The following are some details.

This rebuildable atomizer tank features a beautiful stainless steel construction with a heat resistant ULTEM wide bore drip tip. ULTEM is a high temperature plastic with a higher melting point significantly compared to Delrin.

Despite its low profile and compact design, the Wotofo SERPENT SMM RTA has 4ml tank capacity which is conveniently refillable through its threaded top fill design. The build deck features a 2 post block design with a total of four terminals to accommodate forward and reverse built coil configurations. The design of the Wotofo SERPENT SMM RTA truly brings out the flavor of your favorite e-Liquid.

Wotofo SERPENT SMM RTAParameters:
510 Threaded
24mm in diameter
4.0ml juice Capacity
Stainless Steel Construction
ULTEM Wide Bore Drip Tip

Wotofo SERPENT SMM RTA Features:
Designed In Collaboration with Suck My Mod
Top Fill Design with Twist Off Cap
Unique Dual Wall Build Decks with Four Holes Post
Allows for Forward and Reverse Coil Builds
Designed for Single Coil Configurations
Large Holes Wick
Deep Juice Well
Direct Airflow to Coil Design
Dual Airflow Slots
Adjustable Airflow Control Ring

Package includes:
1 * Serpent SMM RTA
1 * Screw driver
1 * User Manual
1 * Bag Japanese cotton
1 * Bag spare screws and orings
1 * Bag Spare coils

More details of Wotofo SERPENT SMM RTA please have a look at urvapin.

Best Seller:

CoilART AZEROTH RTA Experience Evaluation

Structure of wire electrode column affects the electronic cigarette players’ experience. The structure of the electrode column base affects the air inlet. The combination of the two determines the players most experience.

The AZEROTH RTA atomizer, just on the electrode column and base structure, make innovative changes. Triple and double coil replaceable deck, cooperate with the inlet on the bottom, the taste of this atomizer experience and playability is certainly not too bad.

CoilART”s square carton packaging still contracted style. On the positive side it is printed with brand LOGO, name and appearance of atomizer.It’s the contents list on the back (atomizer, double coil deck, insulation roof, spare glass storehouse, accessories package , ring, T screwdriver , cue CARDS) and anti-counterfeiting query stickers.

Thick stainless steel drip nozzle is connected to the stainless steel oil ring. Around the oil ring there are a total of 12 arc grooves, increasing the friction and also coincide with the vertical groove on inlet adjustment ring. Through oil storehouse you can see CoilARTLOGO on central atomization warehouse.

At the bottom of there are three air inlet, and between the two inlet bulge vertical open three curved groove, which I ncrease the visual effect and enhancefriction.

The stainless steel lid drops use integral design. The one-piece drop inside the mouth is taper, which can effectively prevent condensate deposits. Atomization storehouse and oil ring are together, and the oil ring top engraved with grooves, built-in o-ring seal. Inner sag of the oil ring reduce spill by excessive oil. The atomizer is equipped with double and triple coil deck. All use plating processing. The modeling of triple coil deck is unique.

At the bottom, the inlet have done very well, we can through the electrode base see the intake adopt balance processing, which can make the airflow into atomization warehouse more uniform, and improve taste.


  1. Plenty of 4.5 ML of oil reserves
  2. Triple coil deck brings rich taste
  3. Triple / double coil deck. Playability and suitability of smoke/taste are very high


  1. Triple coil deck, do have difficulty on silk, especially for novice players
  2. The metal lid are together with drops of mouth, it will be a very hot
  3. Hexagon screws of triple coil deck and cross screws of double coil deck are easy to slide tooth





Smok Q-BOX 50W Box mod Starter Kit Review

Recently it seems that smoktech released the newest mini box starter kit Q-BOX,so today let’s check this mini vape kit. This mini vape kit have five fashionable colors available, with compact and mini size. It is so easy to carry and friendly-pocket.

Package of Q-BOX mod:
1*Qbox mod
1*TFV8 baby tank(3.0ml)(EU version:2.0ml)
1*V8 baby M2 dual core(pre-installed)
1*V8 baby M2 0.25ohm dual core
1*USB cable
1*User manual
1*Spare parts

Features of Q-BOX mod:
Material:zinc alloy
Colors:black, silver, purple, gold, rainbow
Battery capacity:1600mAh
Output range:1-50W
Working voltage:0.1-9.0V
Standby current:<500uA
Resistance range:0.1-3.0ohm(VW mode)/0.06-3.0ohm(TC mode)
Temp control range:200-600F/100-315 C
0.96″ OLED screen
Multiple protections
Intelligent atomizer recognition
Puff monitoring system
12 seconds cut-off
Short circuit protection
Over-heating protection
Low-battery warning

Features of TFV8 baby tank:
Material:stainless steel + pyrex glass
Size:53*22mm(EU version:50*22mm)
Capacity:3.0ml(EU version:2.0ml)
Re-designed bottom pair air slots
Top refill system
RBA deck supported

The Q-box kit include Q-BOX mod and baby tfv8 tank, max output 50 watts, built-in 1600 mah battery. It support resistance as low as 0.06 ohm, TC and VW output modes switchable. The smok Q-BOX mod built-in 0.96 inch OLED screen. This clear and bright screen will show you the vaping data, muiltple functions to keep vape safe.

The tfv8 baby tank can hold 3ml e juice. EU version only can hold 2ml e juice, comes with v8 baby-m2 coil heads, re-designed bottom pair air slots, top refill sysem and support RBA deck.

This mini size and fashionable vape kit smok Q-BOX will let vapers can put it in pocket easily. The mini size and powerful cloud beast tank will produce deep taste flavor and massive clouds. So vapers can enjoy vaping everywhere. How convenient it is. I know you would like to have one.





Limitless 200w LMC TC Box Mod New Colors $55.69 Vape Deals

Limitless LMC 200W Box Mod

Temperature Control Box Mod

For a limited time only, the Limitless LMC 200w TC Box Mod New Version is on sale right here for only $55.69 from Urvapin! No coupon code required! Free shipping is included with this purchase! The colors available are new version Red, Flag, Rainbow, Space Gray and Grain.

The Limitless LMC 200W TC Box Mod is powered by two 18650 batteries (not included). This device does feature a maximum wattage output of 200w, and features a custom chip! The Limitless LMC 200w TC Box Mod also features temperature control for Ni200, Ti, and SS wires.

The Limitless LMC 200w TC Box Mod has a ton of safety features built in, providing the user a peace of mind during use. The Limitless LMC 200w TC Box Mod includes three memory modes as well as three presets: Soft, Standard, and Powerful. Lastly, the Limitless LMC 200w TC Box Mod features interchangeable plates with magnets, so you can easily customize this device!

All in all, this is a great deal for the Limitless LMC 200w TC Box Mod! If you are a fan of Limitless and looking to pick up a new temperature control box mod for cheap, then this is a deal you cannot miss! Make sure to check out this deal at Urvapin for only $55.69! This sale does end 6/23/17!

Order here:


Product Features:

  • Required 2 18650 batteries (not included)
  • Maximum wattage output: 200w
  • Minimum Firing Resistance: 0.08 ohm
  • Many Safety Features
  • Temperature Control: Ni200, Ti, SS
  • Interchangeable Plates with Magnets
  • 3 Preset Modes (Soft, Standard, Powerful)
  • New Version
  • Custom Chipset

Order here:



Introduce you a new 22mm dripper tank – Oumier Wasp Nano RDA, which comes with a short profile and solid built body. Featuring a large dual post deck, it’s specially designed for single coil build. The adjustable side air slots are located at the same level with the coil, delivering smooth and dense vapor clouds. The amazing thing is this Wasp Nano RDA adopts an exchangeable squonkable bottom pin design, which allows you to use it with your squonk mod. You can use it with your Squonk style MOD. Gold and Silver colors are available. The top cap is made of PEI, an environment-friendly material, ensuring you a safe and cool vaping.

Size: 22.5mm x 22mm
Thread: 510

It omes with: Wasp Nano RDA, spare o-rings and screws, squonk pin, cardboard-esque cotton. Just two pieces. I love how simple it is.

The quality of the machining is great. The threading for the screws is smooth, and the gold-plating has remained perfect after multiple washings. It is compatible with most 510 thread batteries/MODs. Rebuildables are for experts, not for average or beginner vapers with no knowledge of how to rebuild atomizers. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronic cigarettes.

The machining is great, the flavor is stellar, and it looks pretty nice also.

The only things you may don’t love about it is the allen screws and the tiny juice well. After the building process the screws aren’t much of a con, but the tiny juice well means constant re-dripping. It’s not ridiculously small, but after getting used to 24MM RDAs, the well feels pretty tiny.

If you are look for it, you can select it on urvapin.


Limitless Pulse Pod System

The Limitless Pulse System, by Limitless Mod Co and Ply Rock, is a new, draw-activated, closed system pod mod with a difference – its pods are refillable. Like its older cousin the MyJet by MyVapors, this is a pod-based system which offers the user total control in what e-liquid they vape. The Pulse starter kit ships with the mod itself and two unfilled pods, retailing for $29.95, and a pack of three refillable pods sells for $11.49. The Pulse’s battery comes out at roughly 380 mAh, with a fixed 8 W output. The pods are 1 mL in capacity (although specs elsewhere state 1.5 – 2 mL). The inbuilt coils put out between 1.7 – 1.8 ohms and use silica as wicking material. The Pulse has a striking, futuristic look – LED accents running along the device light up on inhalation. The triangular button up front turns the device on and off, and toggles between the 7 color choices. Don’t judge a book only by its cover, however. Let’s take a closer look and vape on the Pulse.

For a pod mod, the limitless Pulse comes in lavish packaging. First impressions are great and the device looks futuristic with its dynamic accenting. The pods seem robust and the plastic mouthpiece pops off easily with a bit of prying. The Pulse is draw-activated, but can be turned on and off with five clicks of the button that also controls the LED accents.

One of the first things I notice is the beveled edge of the base of the device. This is one pod mod that is not intended to stand upright, and the sharp angle of this edge serves no purpose except to light up and look cool.

The pods click into the Pulse device easily enough, although the angular profile of the top of the Pulse makes it less plug-and-play and more push-and-jiggle than I’d like. I’ve seen conflicting specs for the Pulse from different sources so filled up one pod with a syringe of e-liquid. To my surprise, the pod only has a capacity of 1 mL. This is the smallest capacity of any pod mod system I’ve seen, apart from the Juul.

The coil and wick are located at the base of the pod. The coils use silica as the wicking material. By prying the positive and negative pinsout of the pod housing, I was able to get an ohm reading on a metering tab. It came out around 1.7 – 1.8 ohm. According to Limitless Mod Co’s blog the pods can be refilled 8 to 12 times before they need to be replaced.

Refilling the pods is simple. Remove the black mouthpiece with a little pressure and you will see a red rubber plug. This covers two holes on either side of the airflow chimney. A red arrow on the pod body indicates that only one hole should be used for refilling.

You will need a unicorn bottle or syringe to refill. I measured a capacity of 1 mL based on the syringe I used. Even for a pod mod, that’s small. But with an output of 8 W, you aren’t going to be burning through the e-liquid anyway.

The base containing the coil and wick can be easily pried away from the pod housing using a pair of elbow tweezers. I counted 9 wraps on the coil with an inner diameter of 1.5 mm. If you need to dry burn the coil, one option is to unfold and remove the gold connection pins from the pod housing. Connect the pins to the positive and negative posts of an RDA and screw this onto a metering tab.




Tesla invader 2/3 VV box mod (semi-mechanical)

At the beginning we announce a concept. We used to call box the VV (voltage adjustment) box half machinery box. However this is not accurate. After all, the original half mechanical box just added protection chip on the mechanical structure, and can’t adjust the function of the output voltage. Then appeared in the later using potentiometer device the box mod can adjust the total voltage output effect. But people still call wwit a half mechanical box mod. In fact it can adjust the voltage, so called half machinery is not correct. The correct term should be VV box.

Well, we start the introduction to the box mod. The latest from tesla invaders series invader 2/3, on the basis of the invaders 3 conducted a comprehensive upgrade on both performance and function, of course, the improve on the appearance level. The biggest special is, of course, the battery solution set. It can switch between two battery box mod and three battery box mod.

Packaging is still the continuation of the style of the tesla. On the positive there are brand LOGO, appearance characteristics, box mod name, and the image of the box mod side. On the right side, there is the battery replace solutions. On the left side it is printed with powerful & simplistic INVADER2/3. The product introduction and other information are on the back. The most important, of course, is that pieces of anti-counterfeiting query tags.

Content is also very simple, a box mod , abdouble battery transformation cover, specifications, a battery retractable belt, warning card , and product certification.

The appearance of the three battery mode is similar to the box mod most of them adopt triangle cell layout, accord with human body engineering design appearance. The feeling is very good.

It continues the invaders 3 in appearance design style, angular and has a rounded curve. The box mod has a representative X mark on both sides, on the below is the carbon fiber patch, and tesla’s English name.

On the positive side, it made a concave glyph structure. The ignition key is designed in the middle of the concave. This design enables people to better hold the position of the ignition key, get a more comfortable experience of buttons. Below it is the potentiometer adjustment plate and LED lights.

The box mod electronic cigarette under the double battery solution volume greatly narrowed, but comfort without any lower. Invaders 2/3 is rich in color collocation, the colour collocation is very appropriate also.

IJOY Captain PD270 Mod Review

IJoy are giving what vapers are asking for with the new iJoy Captain PD270 box mod, the dual 20700 batteries (3000mAh each), which are included in the kit, are awesome and definitely a step forward. This mod fires at over 230W and is so precise we have difficulty in matching it to another mod on the market! If your a serious vaper who wants an accurate, powerful mod, then you’ve found it with the Captain PD2710!

The iJoy Captain Box Mod in blackWhat do you get when you combine a sleek and luxurious-looking mod body with state-of-the-art 20700 batteries, the latest in high-tech features, and a reliable company name with a proven track record of vaping product success? The answer’s obvious: the IJOY Captain PD270 Box Mod, of course. This latest offering from one of vaping’s most trusted names aims to be the next big thing in vaping enjoyment and aims to top the list of all the best box mods out there. In this IJOY Captain PD270 Box Mod review, we’ll delve into its finer points and see whether it actually has a real chance of meeting that goal.

So, what’s so special about this mod, anyway? Well, let’s begin with the exterior. In comparing this device’s appearance to a lot of other box mods out on the market today, one thing really stands out: this thing’s exterior is just gorgeous. It has sleek, rounded edges, and elegant accents that help to ensure that you’ll forget all about its box-like shape once you get used to having it around. The display screen is large, with bright white display information to help you monitor settings and performance. Even the firing button gets in one that act, with a well-designed button that offers that high-tech look that’s so popular these days. Urvapin

Of course, aesthetics can only take you so far; it’s what’s under the hood that really matters. In this case, those internal goodies include a mod that can use dual 20700 batteries – which some believe might be the vaping battery of the future.

It’s an oversized battery that offers 3000 mAh and sustained 40 A. In other words, they’re powerhouse energy sources that should provide vapers with all the power they need to meet their vaping demands. IJoy apparently understands that some electronic cigarette users are resistant to change, however, since the company includes an adapter that can enable you to continue to use those old 18650 batteries if you so choose.

Smok TFV12 Tank, which warrior dare to try this kind of electronic cigarettes?

At present, SMOK company has launched Smok TFV12 atomizer. Because I do not know whether SMOK company pay more attention to overseas market, Chinese website has not updated the atomizer information, whereas the English website has already been posted on the detailed data. Today, let us look TFV series’s latest film!

As the latest product of TFV series, TFV12 set the advantages of the original and will eliminate a few small flaws. At present, it has only four colors. But don’t worry, according to the character of SMOK TFV12, it will also introduce the rest of the eight kinds of color soon.

TFV8’s English name is Cloud Beast, and the English name of TFV12 upgraded called Cloud Beast King; So TFV8 smoke monster, to TFV12 became the king of the smoke monster, simple and crude, it’s visible that SMOK is very confident with TFV12.

Next, let’s take a look at the size of the TFV12, height of 70 mm, 27 mm in diameter, weight 90.5 g, heavier than its TFV8. Smoke capacity reached 6 ml of oil, which consistent with the TFV8. Larger volume, smoke oil capacity is the same, this is because TFV12 air inlet is further expanded.

TFV12 also put intake system at the bottom, at the bottom of the two inlet hole can adjust stomatal in 360 ° which was 30% larger than TFV8. The volume is bigger, which lay the foundation of increasing the amount of smoke.

TFV12 in most of the configuration is same to TFV8. The top cover gas hole size slightly larger than TFV18, refueling more convenient; Heat insulation resin cigarette holder, hot humanization, which important to TFV12 equipped with finished product core.

TFV12 provide 9 finished product core for players to choose, 0.15 Ω V12 – X4 best power (four coil 100-170 w), 0.15 Ω V12 – Q4 best power (four coil 90 -160 w), 0.17 Ω V12 – T6 (six coil, the best power 110-150 w), 0.16 Ω V12 – T8 (eight coil, the best power 120-200 w), 0.12 Ω V12 – T12 best power (twelve coil 120-200 w) and two RBA.

Core space of the RBA had gotten much bigger, let players enjoy the fun of DIY. The most worthy is TFV12’s equipped finished product core. Twelve coil finished product core is violent beyond imagination. It s the most fundamental purpose that TFV12 expand air inlet. After all, it has to satisfy the cooling effect of twelve hair and smoke volume.

TFV8 SMOK, equipped with eight coil product core; The launch of TFV12 equipped with 12 coil product core. According to the trend, whether the next generation of TFV16 will send finished product core, equipped with 16 coil is unknown.

TFV12 is just as its product introduction says “We have had been imitated, but never beyond”. After all twelve coil product core is not kidding.

Buy SMOK TFV12 TANK FROM URVAPIN e cigarette store

Review of Tesla Nano 120w Steampunk Mod

Quick-ish review of the super swell Tesla Nano 120w Box mod. This is the latest entrant in their Steampunk-styled line of Nano mods. As a huge fan of the Tesla Nano 100w back in the day, I’ve been super eager to get my hands on this bad boy.
Admittedly, the steampunk Tesla Nano 120w Box mod design is subjective here. There’s no “normal” version. This is an entirely zinc alloy, dual 18650 mod, available in metallic colors. I got “black” which is more of a “bright/faded gunmetal.” They also do silver, copper and bronze.
Gotta say, the packaging is exceptionally nice. Really beautifully embossed patterning, great construction. Like I really noticed how well done the box was. Tesla’s pretty good in this regard.First thing I noticed when I took it out of the box was:Good lord, this entire thing is one solid block of CNC’d zinc alloy.It feels premium as all get-out.
This is a weighty mod for sure, but not uncomfortably so (though I would not call it pocketable), and its weight matches its construction: the entire chassis is milled from a single piece of alloy, and is very very thick. No seams at all, and zero exposed screws. The bottom battery door is thick as well, closes nice and tight, and is zinc alloy. There is effectively zero plastic anywhere on the mod.
The steampunk design is beautifully milled and feels great, no sharp edges anywhere. The black is really slick. It’s not super dark, which I appreciate – it’s a great contrast against SS attys while still feeling it was made for them. Black attys look amazing as well. Even my Royal Gold Super Tank Mini 25mm looks totally baller.The 510 connector is nice and deep and springy. Threads are super smooth. I’ve had no problems with any attys, both long and short pins. All my attys – well, so far, the Kennedy, SZCRDA, CSMT, Icon, Medusa, Alpine – fit flush. No gap, not even a micron. e cigarette store
Aside from the sheer awesomeness of the build quality and the design, the OLED display is bright, and doesn’t bleed light. The OLED itself is right there in the open, there’s no plastic over it, which makes it tack sharp. The info on the display is damn ample. It’s got both a battery graphic and a percentage readout. Nothing is hidden, everything is on display. The info arrangement makes sense and is obvious. All good things here.
There’s an On-Off switch. Seriously. It might not seem like much but it’s freaking great. It makes the mod awesome to build and wick on. No fucking around with multiple fire button presses. Flip the switch, it’s off. Wick. Flip it again, it’s on.The menu system is stupid easy. Three fire button presses and you get an onscreen cursor. Use the +/- buttons to select any item on the screen, hit fire to select it, get a submenu to change it. For example, select the ohms readout, and you can change the ohms. Select the strength display to change the setting or adjust the user curve. And so forth. Super simple, no messing around with a top-level “main” menu, just select shit on the screen and change it.
The big, angled fire button is super comfortable and my fingers naturally land right on on it however I hold the mod. The +/- buttons are large and clicky.
Adjusting watts is always in 0.5w increments. This is so great. I love how the Alien adjusts intelligently depending on how long you press thebuttons, but this is better, and one of the features I loved from the Nano 100w. And of course it’s infinitely better than the adjustment on the Predator.