True MTL RTA Packaging
The tank falls into the hands of the buyer in uncomplicated packaging, designed quite typical for the products of the Chinese manufacturer: on the lid next to the Ehpro logo you can find a sticker with the name of the co-author of NatureVape , and instead of the full name of the atomizer, only a large TRUE (sic!) Inscription appears . The color of the device is clearly visible through a large transparent window, but for those who do not believe their eyes, on one of the sides there is a bar code where the color is also signed (in my case, Black ). On the opposite side flaunts a QR code and its decryption, which allows you to determine the authenticity of the purchase (on any page at the bottom), at the bottom of the box there is only a series of pictograms, a list of warnings, for some reason mentioning also lithium-ion batteries, and the same huge warning about the dangers of nicotine as on the lid.
True MTL RTA Kit
- Ehpro True MTL RTA Bakomizer with 2 ml flask
- 3 ml replaceable flask
- User’s manual
- Spare Orings
- Finished spirals
- Spare screws (2 pcs.)
The contents of the package are not very rich, but it includes the essentials so that you can start the device “out of the box”, including two clapton and cotton wool. Inside, in addition to the OTC card and the incomplete guarantee, there was an instruction in eight languages, including a machine translation into the “Great Mighty”.
Appearance True MTL RTA
What pleases (or not really, anyone like …) is that the “classic” diameter tank is 22 mm, i.e. Perfectly fits under old-school battery packs like pico or Swag . There are still a huge number of them on the market, i.e. With our device you can build a fairly compact setup. The atomizer can hardly be called particularly remarkable for its appearance, rather a rather typical representative of GTA devices. Of the distinguishing features, only a fanciful drip tip and a shallow pattern on the top cover and the airflow adjustment ring, the name on the dome is almost imperceptible.
Image from szehpro.com
Three options of True MTL RTA flaunt on the promo photo , but (so far?) You can find only two on sale: black and steel, each adorns a corresponding color acrylic drip tip.
Features True MTL RTA
- Diameter: 22 mm (with 3 ml flask 24.8 mm)
- Height: 32.5 mm (with 41.5 mm complete kit)
- Materials: stainless steel, glass, acrylic
- Single helix base
- Tightening Adjustment: 1.0 / 1.2 / 1.4 / 1.6 / 1.8 mm
- Volume: 2/3 ml
- Connector: 510
- Colors: Black, SS
Focus On www.ave40.com For More Vape Tank.
On top of the device, you can see nothing open refueling holes through which a silicone plug peeps, i.e. our device allows you to quickly fill the fluid without removing the cover, just turn it clockwise. A connector with a protruding positive pin flaunts below, but I would not wind up such an atomizer on hybrid connectors. The lower part is decorated with typical badges and inscriptions, you can immediately find the serial number of the instance.
It’s worth lingering a bit on the drip He is a great sample. Simultaneously with a narrow opening, and at the same time devoid of frequent problems with accumulating condensate. The complete drip tip sits on two orings in its place quite tightly, the depth of the landing in the lid will even put here the glandochke from Batareikin .
The refueling system is a rather interesting solution in the form of two holes that open by simply turning the atomizer lid. The system does not flow and does not let air through, i.e. it is tight, the holes are sufficient to accommodate the very tip of the nose of a standard gorilla , however, constant streaks on these very nozzles can remain on the lid itself and it will have to be wiped after refueling. When closing, you can see that the cover not only runs into the protruding edges of the seal, but also compresses the holes.
The tightening adjustment system is represented by an AFC ring with one hole and five-hole options in the base with a diameter of 1.0 to 1.8 mm. The ring rests on one oring, sits confidently, and the turn is quite tight. The design provides stoppers, which allows you to simply disassemble or unscrew the tank from the mod.
The dome of the evaporation chamber has a conical shape and a small size, which is also reduced by massive stands of the deck. In my opinion, the connection is the weakest point of the device, because firstly, the thread pitch is small, and secondly, the grooves under the cotton wool are quite large, which makes it quite difficult to get into the thread. And, of course, there is always a high probability that the ends of the wick will fall on the turns and that you will have to disassemble the tank with the help of pliers and such and such a mother.
The flask is held in the upper part of the atomizer in a thick oring, and it sits quite confidently and you can easily get to the winding without spilling liquid around you. The main thing is not to open the top cover during disassembly (only if by chance, it rotates in the opposite direction), you will have to look at this.
Included with the tank is a pot-bellied glass that has become a mandatory option for many manufacturers, which gives a small, but still an increase in capacity – up to 3 ml. With it, the tank becomes larger in diameter (almost 25 mm) and can no longer fit on peak-like battery packs.
Base and Winder True MTL RTA
Focus On www.ave40.com For More Vape Tank.
The atomizer deck is made according to the GTA principle, i.e. raised above the bottom of the tank, and the wick pulls the liquid from below. If Ehprodid not make grooves in the thread, but holes, as, for example, in the Hastur MTL RTA Mini, it would be much more convenient to lay the wick. And certainly, there would be no problem with winding the upper part. A 1.5 mm diameter blowing hole is raised to reduce condensate leakage into the collector. The tails of the spiral are clamped with decent screws for a Phillips screwdriver, for a few changes of windings the slots look fine, but it is better to throw out the complete screwdriver right away. At first glance, the racks seem to be another variation on the Kaifun mount system, but upon closer inspection, it becomes noticeable that everything is a bit tricky here.
In addition to the familiar scheme, when the wire can simply be pulled under the hats, wound to the side, clamped and cut, True MTL RTA also has terminals. These parts are not spring-loaded, they will have to be lifted by hand or pushing the coils, but if you have any difficulties installing the old and familiar way, you can try to put spirals under them. I used 0.32 cantal for winding, wound eight turns on a 2.5 mm mandrel, the resistance was about 1.5 Ohm. Cotton should be cut along the edge of the deck (the photo above is not a good example, boldly cut more), the main thing is that the cotton should not be too lush and do not fall on the threads. If you wet the wick before assembly, it becomes easier to lay the cotton wool and there will be less chance that there will be problems with assembly, and then disassembly.
I used the device for about a week, replaced it with my beloved Kayfun Prime and Berserker MTL RTA. Returning to the beginning of the article, I would like to note that, purely subjectively, the tank came out really cigarette: with a successful drip tip, tight tightening, comfortable struts and a small blowhole under the spiral. Unlike recently reviewed instances from Advken and Hotcig. The taste also turned out to be excellent, a small evaporation chamber perfectly reveals it. The assembly and processing of the device are impeccable, no visible jambs or defects were found, the appearance is simple, but at the same time not artsy, even cylinder with simple shapes and almost imperceptible pattern. There are still claims to the device, and they relate to some used design solutions. The main one is that it is difficult to assemble the tank due to the fact that on the deck where the dome is screwed, the thread is very small, and because of the wide grooves, its significant part is simply missing, it is far from the first time to get into the turns. And the option with such placement of holes for cotton is still not the most convenient, there are examples much more successful when cotton has less chance of getting onto the thread. There is also a little nitpicking to the filling holes, due to their small size, a small amount of liquid is necessarily transferred from the nozzle of the bottle onto the lid, and it will be possible to fill the tank from a glass pipette, but it’s difficult not to get wet. An additional flask gives the option to slightly expand the modest volume of the atomizer. But we have long come to terms with constraintsTPDs that manufacturers must follow. In general, despite the rather pathetic (but true!) Name, the manufacturer has a definite “like”.
The tank definitely deserves attention as a simple and convenient atomizer for a tight cigarette puff and, importantly, for small battery packs.
Click Here Ave40 For Vape Wholesale Cooperation.
Now It’s Available: Ehpro True MTL RTA
Hot Sale Recommendation:
Vaporesso Aurora Play Zippo Pod Starter Kit
Justfog Compact 14 Starter Kit
Rincoe Mechman Mesh Kit
Voopoo Drag Nano Kit
Voopoo Drag Baby Kit
Disposable Pod System Kit
Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html